Blackmer XL Series
The XL pumps are constructed of ductile iron (ASTM 536, 18% Elongation) that will withstand sudden thermal shock and stress well beyond the capabilities
of cast iron. All models are fitted with replaceable casing liners and end discs that allow easy rebuilding of the pump, without removing the pump from the piping.
Models are available in 1.25, 1.5, 2, 3 and 4-inch port sizes with capacities from 5 to 345 gpm (19 to 1,305 lpm). The 1.25 and 1.5-inch models have NPT tapped ports. The 2, 3 and 4-inch models have flanged ports.
?Standard elastomers include FKM O-rings. Optional Buna-N or PTFE elastomers are available. A wide range of mechanical seal components and a variety of vane materials are optional.
The X(R)L1.25 and XL1.5 motor speed pumps are base mounted. The X(R)LF1.25 and XLF1.5 models are fitted with an integral bracket for direct
mounting to a NEMA C-face motor. Base mounted unit assemblies with helical gear reduction drive are available for all XL models.
Blackmer XL type pumps are commonly used in refineries, lube oil plants and general industry for processing, filling and transfer applications.
Utilizing Blackmer’s unique sliding vane designs, these positive displacement rotary pumps offer the best combined characteristics of sustained high level
performance, energy efficiency, trouble-free operation and low maintenance cost.
XL Series Shock-Resistant, Ductile Iron Pumps
Pump Performance Data*
* Approximate capacities and horsepower (HP) are based upon a 100 SSU (22 Cs) liquid at 50 PSI (3.45 BAR) differential pressure.
Refer to characteristic curves for capacities and horsepower at other pressures and viscosities.
Sales Information and Equipment Application Assistance
Blackmer has a world wide distribution network to assist you in specifying any of our family of pumps, compressors and other equipment for your application. For more information or to find the distributor
nearest you, please contact us at the telephone, fax or internet address listed below.